Crystallization Technologies

Fraunhofer Center for Silicon Photovoltaics CSP

© Fraunhofer CSP

The Fraunhofer Center for Silicon Photovoltaics CSP, division »Crystallization Technologies« CSP, provides a technology platform for industry related crystallization using production scale, state-of-the-art equipment. Our research activities focus on the reduction of process costs, the optimization of ingot properties, and  further improvements of automation of crystallization processes.

The Fraunhofer CSP-LKT offers: Crystallization experiments (mono, multi) for material testing, R&D projects with respect to process control and process optimization, and manufacturing of customer specific crystals.

Due to the competences of Fraunhofer CSP and the embedding into the Fraunhofer Institute for Solar Energy Systems ISE, the whole spectrum of silicon technology, from analytical methods, of material processing tools, wafering, cell manufacturing, through to  cell certifications, and modul fabrication is available.

On this page:

Czochralski

With an EKZ-2700 and two EKZ-3500 (all from PVA-Tepla), Fraunhofer CSP has efficient and highly sophisticated Czochralski pullers for the growth of mono-ingots up to 9” diameter. The machines are equipped with optimized hot-zones, graphite cones and gate valves, which allow the growth of several ingots out of one crucible. The process is automated to a high degree, different recipes are available, e.g. for variations of the diameter, the shoulder angle, or the cone length. A feeder system for maximizing the charge weight or for tests related to multi-pulling may be used as well as a unit for active crystal cooling, which enhances the removal of latent heat during solidification allowing higher crystallization rates.

Research activities include questions related to the crucible life-time, the transport of oxygen into the crystal, and to the optimization of the process with respect to processing time and energy consumption. Further on, we are performing test crystallization experiments for leading silicon feedstock manufacturers in order to analyze the material quality and the resulting resistivity distribution up to the resulting cell efficiencies.

Contact
Dr. Roland Kunert
Phone +49 345 5589-5602
Email

to top

Float Zone

With the FZ-14, we are able to grow Floating Zone crystals with a diameter up to 4“ and a length of 130 cm, with the newly developed FZ-35 processes up to 8” are possible. Our Floating Zone (FZ) activities focus on benchmark tests of different feedstock materials and the preparation of feed-rods from cheap solar-grade silicon regarding the use for float zone growth. A further topic is the improvement of the process automation and user friendliness. The advantages of the FZ technique are impressive, like higher growth rates, reduced oxygen and carbon concentrations, and cost savings on crucibles.

FZ-crystals usually show the highest carrier lifetimes (> 2-3 ms) and highest cell efficiencies of all silicon wafers. Nevertheless, for mainstream application of the FZ method, the process needs a much higher degree of automation than it is given right now. If a sufficient supply of feedstock usable for FZ is guaranteed, the FZ technique might become a serious competitor for the production of solar grade ingots. The FZ technique allows the rather simple in-situ doping from the gas phase. In such a way, very uniform axial dopant distribution profiles can be achieved, which is an important aspect with respect to the growth of phosphorous doped n-type material.

Contact
Dr. Roland Kunert
Phone +49 345 5589-5602
Email

to top

Block Casting

Our multi-crystallizer VGF-732 is equipped with a G4 hot-zone, which allows the casting of 250 kg blocks. The machine is equipped with three independently controllable heaters, which allows a very flexible temperature control. The thermal flexibility is very favorable for the implementation of mono-like processes as well as the casting of high-performance silicon. The multi-crystallizer is primarily used for the realization of specific R&D programs for process optimization, like e.g. improvement of the temperature control, reduction of carbon impurity level by adapted gas flow direction and gas flow rates. Another current topic is the development of new methods for the detection of the solid-liquid interface and the in-situ measurement of the crystallization rate. For smaller ingots, a G1/G2 furnace is available at the Fraunhofer ISE in Freiburg. A dedicated crucible coating facility is fully operational. With this machine, ingots of some 20 to 80 kg can be grown.
The vacuum induction melting facility is used in particular for R&D topics related to material refinement and recycling of cell and module scrap. New processes for silicon purification and the re-use of recycled silicon for the ingot and wafer manufacturing are under development .

Contact
Dr. Roland Kunert
Phone +49 345 5589-5602
Email

to top

Equipment

  • Czochralski EKZ-270: Mono-ingots of ≤9“ (length: 70 cm); p-type / n-type crystals; Residual gas analyzer; Feeder for Re-charging (optional)
  • 2x Czochralski EKZ-3500 (im Aufbau): Einkristalle 8“ (length: 200 cm); active crystal cooling
  • Slim rod puller (DZA 3000) (available Q4-2013): Slim rod length: 240 cm
  • FZ-14: Mono-ingots of 4“ (length: 130 cm)
  • FZ-35 (available Q1-2014): Mono-ingots of 8“; p-type, n-type
  • VGF-732: G4 hot-zone (250 kg); Residual gas analyzer (MKS); In-situ measurement of crystallization rates
  • Vacuum induction melting furnace (Steremat)
  • String-Ribbon® Furnace »Quad« (available 2014)
  • Mechanical processing of feedstock: Ingot-Shaper IS-160 MK-II
  • High resolution optics for interface observation
  • GDMS (ThermoScientific): Analysis of residual impurities in the ppb range; pulsed source for improved spatial resolution
  • LPS/PL: Lateral photovoltage scanning with integrated Photoluminescence

to top

Social Media